Back
EDTA Cu
Product Detail
EDTA-Cu 15%
DESCRIPTION
EDTA copper is organic chelated copper. Compared with inorganic copper, it is easier to dissolve, and the soil is not compacted, so it is more easily absorbed and utilized by plants and increases the output ratio of plants. It is used as a trace element fertilizer in agriculture. In fertilizer production, it can be widely used as an added raw material for foliar fertilizer, flushing fertilizer, drip irrigation fertilizer, water-soluble fertilizer, organic fertilizer and compound fertilizer, and for foliar spray and flushing, dropper and can be used for soilless cultivation.
Suitable for all kinds of fruits, vegetables, grains and cash crops.
PRODUCT SPECIFICATION
Chemical Name | Copper Disodium EDTA |
Molecular Fomula | C10H12N2O8CuNa22H2O |
English name | Ethylenediaminetetraacetic acid copper disodium salt hydrate |
Other name | EDTA-CuNa2 |
Molecular weight | M=433.77 |
CAS | No.: 14025-15-1 |
Property | Blue crystal powder,soluble in water easily |
Copper content | 15.0%±0.5%( The other content can be custom made) |
Solubility in water | Completely soluble |
PH(1%sol.) | 5.5-7.5 |
Density | 0.70-0.80g/cm3 |
Water Insoluble | No more than 0.1% |
Scope of application | As a trace element in agriculture |
CHLORIDES (Cl) & SULPHATE(SO4)% | No more than 0.05% |
Main properties | EDTA-Cu is a stable water-soluble metal chelate, in which copper exists in a chelated state. |
Storage | Stored in a cool, dry place and must be re-tightened after opening. |
PACKING
Complex bag or craft bag with plastic inner,25kg per bag.Available in packages of 1000kg,25kg,10kg,5kg and 1kg.
DOSING INSTRUCTIONS/FERTIGATION
Suitable for all kinds of fruits, vegetables, grains and cash crops.
By ground, apply 1-2 pints per acre in a minimum of 20gals.of water. By air, apply 1-2 pints per acre in a minimum of 5 gals of water.It is a stable water soluble metal chelate, mainly used in agriculture and horticulture as micronutrient, and Copper is present in a chelated form.
The pH in the tank should be above 4.In the case of foliar feeding as part of a spray-mix, testing the intended spray-mix on a small area is recommended prior to commercial treatment. The mentioned indicated dosages and application stages are subject to soil and climatic conditions,influence of previous crops and other specific conditions. Exact dosages and application stages can only be given after an objective diagnostic procedure by e.g. soil, substrate and / or plant analyses.
Copy product links
Long by picture save/share
